Search

Alphalan Starter Kit

Highly concentrated lanolin spray for use on Boats, Cars, Machinery, Heavy Plant,
Motorcycles, HGV’s, Offshore and anywhere corrosion prevention is essential.

Specifically developed to provide thick film long lasting lanolin protection on metal which is corroded and/or prevent corrosion from forming in the harshest operating conditions. Penetrates deeply to prevent moisture traps. Leaves a protective film to waterproof and guard against corrosion. Lubricates – increases efficiency of working parts. AL01 ALPHALAN may be safely be used on all surfaces to provide a fully water resistant coating, recommended for Off shore oil and marine applications.Contains more Lanolin solids than other liquids available currently, making ALPHALAN much longer lasting and more cost effective.

£39.90

Online orders are processed between 9 am and 4 pm Monday to Thursday (Excluding bank holidays) and 9 am to 1 pm Friday.

Any orders placed outside these hours will be processed on the next working day.
Standard delivery can take up to 5 working days.

Express delivery is targeted to arrive within 48 hours.

Any delivery times stated as a guide only and cannot be guaranteed. External couriers are used and we have no control over outside influences.

Description

Typical uses

Preventing corrosion on any clean metal surface. Protects against further corrosion spread on already rusted parts. Protecting vehicle under-bodies, boat trailers, heavy Plant, metal fixings etc. Pre-treat new and restored vehicles and machine parts. Sealing electrical connections from water ingress. Protect inside metal box
sections on chassis, inside door cavities and hard to reach areas.

 

METHODS OF APPLICATION

Spray directly onto area requiring protection no need to mask areas. For more difficult to reach areas box sections etc use extension tube and for a more directional spray to protect key areas use the short straw.
N.B. Do not spray on short circuits where sparking is likely.
Due to the uniquely high level of Lanolin in ALPHALAN there is no need to brush on/pre-treat with a grease-like paste to protect key areas, ALPHALAN provides full protection quickly and easily.

Data Sheets

Register to download sheets

benefits

  • Very High content of Natural Lanolin
  • Faster Drying
  • Easy to use aerosol allows an even film to be applied to any surface
  • Extremely economical, fast and effective film protection
  • Provides long-term protection extending re-application intervals
  • Penetrates scale and rust stopping corrosion spreading
  • Superb water & chemical resistance providing lasting protection against corrosion
Specification
Colour
Amber
Appearance
Tan Fluid
Odour
Low to Nil
Flash Point
>50°C
Film Type after curing
Waxy
Solid content
Lanolin >40%
Copper corrosion (IP 112)
Pass
Viscosity
Non Viscous
Dynamic corrosion resistance (EMCOR)(IP 220)
0.0
4 ball weld (kg) ASTM D 2596 @ 1450 RPM
180 Kg
Application temperature range. AVOID NAKED FLAMES
-40°C to 50°C
Shelf Life
2 Years minimum
Storage Temperature
< 50°C
Film curing time – to touch dry (may be effected by ambient temperatures)
24 Hours

Consistent with good manufacturing practice, use only the minimum amount necessary to achieve desired result.

Safety Information
AVOID NAKED FLAMES. Please see Material Safety Data sheet for full Safety information and risk phrases.

This product contains NO nut derived, genetically modified, soya or vegetable derived ingredients.

Reviews

“BDX lubes everything beautifully without any dirt sticking to it” ” BDX stays in place longer than grease on our chains” “We re-lubricate less frequently” “Most importantly it is much safer, as we can re-lubricate without removing the guards” Chris Corley Quarry Site Supervisor

Brett Aggregates

“A farmer came into my yard for help removing an exhaust manifold & broken studs.” “I tried welding a bit of rod on, but that snapped too” “I tried BDX, after a few minutes I got a little movement, a bit more & got the broken studs & the other seized studs off, I couldn’t believe it” Jason Graham

Grahams Engineering

“We had tried everything – Heat – Pullers – Brute Force nothing worked” “A squirt of BDX top and bottom, left overnight, a light tap and off it came” “It just doesn’t get any better does it!” David Meredith Engineering Manager

Forterra Building Products

“The boss and myself where trying to undo a seized solid fitting on a steam boiler, we were both swinging on it with big shifting wrenches.” “I sprayed on a little BDX in a couple of minutes I was able to undo it myself” “It’s like night and day compared to what we used to use” Gary Henderson

Shetland Fish Processors

Facebook Instagram Twitter