Specifically developed to provide thick film long lasting lanolin protection on metal which is corroded and/or prevent corrosion from forming in the harshest operating conditions. Penetrates deeply to prevent moisture traps. Leaves a protective film to waterproof and guard against corrosion. Lubricates – increases efficiency of working parts.
ALPHALAN may be safely be used on all surfaces to provide a fully water resistant coating, recommended for Off shore oil and marine applications.Contains more Lanolin solids than other liquids available currently, making ALPHALAN much longer lasting and more cost effective.
£16.98
Preventing corrosion on any clean metal surface. Protects against further corrosion spread on already rusted parts. Protecting vehicle under-bodies, boat trailers, heavy plant, metal fixings etc. Pre-treat new and restored vehicles and machine parts. Sealing electrical connections from water ingress. Protect inside metal box sections on chassis, inside door cavities and hard to reach areas.
METHODS OF APPLICATION
Spray directly onto area requiring protection no need to mask areas. For more difficult to reach areas box sections etc use extension tube and for a more directional spray to protect key areas use the short straw.
N.B. Do not spray on short circuits where sparking is likely.
Due to the uniquely high level of Lanolin in ALPHALAN there is no need to brush on/pre-treat with a grease-like paste to protect key areas, ALPHALAN provides full protection quickly and easily.
Specification | |
|---|---|
Colour | Amber |
Appearance | Tan Fluid |
Odour | Low to Nil |
Flash Point | >50°C |
Film Type after curing | Waxy |
Solid content | Lanolin >40% |
Copper corrosion (IP 112) | Pass |
Viscosity | Non Viscous |
Dynamic corrosion resistance (EMCOR)(IP 220) | 0.0 |
4 ball weld (kg) ASTM D 2596 @ 1450 RPM | 180 Kg |
Application temperature range. AVOID NAKED FLAMES | -40°C to 50°C |
Shelf Life | 2 Years minimum |
Storage Temperature | < 50°C |
Film curing time – to touch dry (may be effected by ambient temperatures) | 24 Hours |
Consistent with good manufacturing practice, use only the minimum amount necessary to achieve desired result.
Safety Information
AVOID NAKED FLAMES. Please see Material Safety Data sheet for full Safety information and risk phrases.
This product contains NO nut derived, genetically modified, soya or vegetable derived ingredients.
